New IN STOCK Practical accessories Waterproof Notebook JASE note Kč145.00 Pocket-sized waterproof notebook in green design. This notebook features a spiral binding that ensures maximum clarity of your notes. Its dark green cover is ideal for natural environments where white paper could reveal your position. The notebook contains 48 sheets of anti-reflective, waterproof green all-weather paper with horizontal lines. Thanks to... Add to cart
IN STOCK Tuning CZ 457 trigger resistance springs spring457 Kč325.00 A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact... Add to cart
IN STOCK Tuning Forehead breech for CZ P-10 czp104 Kč995.00 Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol. Add to cart
IN STOCK Tuning Trigger resistance springs CZ P-10 spring10 Kč325.00 The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are... Add to cart
IN STOCK Tuning Pistol grip ATI for AR-15 / AR-10 ar1510X1 Kč599.00 The high-quality ATI X1 pistol grip is designed for the AR-15 and AR-10 weapon, including their clones and modifications. This grip pistol grip is made of a special DuPont polymer and is resistant to water, extreme temperatures, chemicals and normal mechanical damage.Ergonomics is designed to fit each hand and the grip is as comfortable as possible. The... Add to cart
IN STOCK Tuning Pistol grip ATI X2 for AR-15 ar15X2 Kč599.00 The high-quality ATI X2 pistol grip is designed for the AR-15 weapon, including their clones and modifications. This grip pistol grip is made of a special DuPont polymer and is resistant to water, extreme temperatures, chemicals and normal mechanical damage.Ergonomics is designed to fit each hand and the grip is as comfortable as possible. The selected... Add to cart
IN STOCK Tuning Trigger resistance spring CZ 557, 550 and 527 spring557 Kč245.00 Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... Add to cart
IN STOCK Tuning Trigger resistance spring TIKKA T3, T3x and T1x springt3 Kč245.00 Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... Add to cart
IN STOCK Tuning SAKO 75, 85, 595 and 695 trigger resistance spring springsako Kč245.00 Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... Add to cart
IN STOCK Tuning Walther steel cartridge plug zatwalther Kč990.00 Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure... Add to cart
IN STOCK Tuning Filling PIN for WALTHER air rifles (universal) pinwalther Kč590.00 Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs). Add to cart
IN STOCK Tuning Enlargement of the Walther LG 300 pressure regulator chamber ring4 Kč895.00 Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air... Add to cart
IN STOCK Tuning Reduction for Walther LG 400 reduction1 Kč495.00 By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most... Add to cart
IN STOCK Tuning Silencer for Walther LG 300/400 reduction2 Kč995.00 You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly... Add to cart
IN STOCK Tuning Walther regulator pressure transducer barometr Kč5,490.00 Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400... Add to cart
IN STOCK Tuning Enlargement of the Walther LG 300 pressure regulator chamber with ASSEMBLY ring4m Kč1,290.00 Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air... Add to cart
IN STOCK Tuning Silencer for Walther LG 300/400 with ASSEMBLY reduction2m Kč1,390.00 You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.If you do not dare to install this product, we will be happy... Add to cart
IN STOCK Tuning Walther regulator pressure setting barometr Kč490.00 Do you want to set the pressure regulator to your desired value and do not want to buy a special measuring device? Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly? We will be happy to provide you with this service. We provide pressure adjustment... Add to cart
IN STOCK Tuning Walther LG 300 tension lever pin kolik1 Kč245.00 The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set... Add to cart
IN STOCK Tuning Shortening the Walther LG 300 tension lever kolik2 Kč1,245.00 The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever.Shortening the tension lever seems to be very easy, however, it is a very hard hardened material, so shortening and... Add to cart
IN STOCK Tuning Fuse cover for CZ SCORPION EVO 3 zas1 Kč450.00 Fuse cover for CZ SCORPION EVO 3.Are you not using the fuse on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused fuse is very easy and you can handle it in a few seconds. Add to cart
IN STOCK Tuning Browning X-BOLT trigger resistance spring springbrow Kč245.00 Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting... Add to cart
IN STOCK Tuning Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for CZ 75 SP-01 Shadow, CZ... montkol75 Kč1,803.00 The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The mounting of the collimator sight is made of refined steel and will serve you 100% for decades. Add to cart
IN STOCK Tuning Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for GLOCK montkolglock Kč1,803.00 The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The assembly of the collimator sight is made of refined steel and will serve you 100% for decades. Add to cart
IN STOCK Tuning Front sight CZ FO 1mm mufo1 Kč760.00 The CZ FO front sight with light-conducting fiber 1mm wide 3.3mm with a height of 5.75mm is suitable for a fixed sight for CZ P-07, CZ P-09, CZ P-10 C. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-07, CZ P-09, CZ P-10 C pistols, where it... Add to cart
IN STOCK Tuning Front sight CZ P-10C FO 1.5mm mufoczp10c15 Kč760.00 The CZ P-10 C front sight with light guide fiber 1.5 mm wide 3.2 mm and 9 mm high is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal... Add to cart
OUT OF STOCK Tuning Front sight CZ P-10C FO 1mm mufoczp10c10 Kč760.00 Front sight CZ P-10 C with optical fiber 1 mm wide 3.2 mm with a height of 9 mm is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal... Add to cart
IN STOCK Tuning Fixed GLOCK sights miglock Kč2,340.00 High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. Sights are supplied in a set, i.e. a fixed sight and a light guide front sight. You can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight is roughened against unwanted glare.Made in Czech... Add to cart
OUT OF STOCK Tuning Fixed sights GLOCK FO miglockfo Kč2,550.00 High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. The sights are supplied in a set, i.e. a fixed sight with a 1mm light-guiding fiber and a light-guiding front sight. For the fly, you can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight... Add to cart
IN STOCK Tuning Trigger spring CZ 75 - 0.7 spring7507 Kč295.00 Trigger spring for CZ 75 used to reduce trigger resistance and increase its accuracy. We recommend using it, for example, when converting a double-action trigger mechanism to a single-action one. This will give you a gentler squeeze of the trigger and, as a result, greater accuracy. The spring is suitable for most CZ 75 type pistols and can also be used... Add to cart
IN STOCK Tuning Trigger spring CZ 75 - 0.8 spring7508 Kč295.00 Trigger resistance spring for CZ 75 used to reduce trigger resistance and increase its accuracy. We recommend using it, for example, when converting a double-action trigger mechanism to a single-action one. This will give you a gentler squeeze of the trigger and, as a result, greater accuracy. The spring is suitable for most CZ 75 type pistols and can... Add to cart
IN STOCK Tuning CZ 75 TS trigger spring - 0.7 spring75TS Kč295.00 Trigger resistance spring for CZ 75 TS used to reduce trigger resistance and increase its accuracy. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith. Add to cart
IN STOCK Tuning Cock catch spring CZ 75 - 0.7 springza7507 Kč295.00 Cock catch spring for CZ 75 - 0.7 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith. Add to cart
IN STOCK Tuning Cock catch spring CZ 75 - 0.8 springza7508 Kč295.00 Cock catch spring for CZ 75 - 0.8 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith. Add to cart
IN STOCK Tuning Cock catch spring CZ 75 - 0.75 springza75075 Kč295.00 Cock catch spring for CZ 75 - 0.75 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith. Add to cart
IN STOCK Tuning Precise barrel guidance CZ 75 - 16.3/12.8 ved751612 Kč1,836.00 High-quality and very accurate barrel guide CZ 75 - 16.3 / 12.8 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the... Add to cart
IN STOCK Tuning Precise barrel guidance CZ 75 - 16.3/14.0 ved751614 Kč1,836.00 High-quality and very accurate barrel guide CZ 75 - 16.3 / 14.0 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the... Add to cart
OUT OF STOCK Tuning Precise barrel guidance CZ 75 - 17.3/14.0 ved751714 Kč1,836.00 High-quality and very accurate barrel guide CZ 75 - 17.3 / 14.0 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the... Add to cart
IN STOCK Tuning Weaker return spring CZ 75 - 9 LBS spring759 Kč390.00 Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 9 LBS. Add to cart