New IN STOCK Defences for men and women copy of Teleskopický obušek Easy Lock 20" (508mm) SFL Kč441.00 Add to cart
IN STOCK Muzzle brake and compensator Muzzle brake CZ SCORPION EVO 3 (M18x1) sar218bevo Kč2,490.00 Muzzle brake SAR2 for CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the side bounce of the weapon. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation, locking the brake... Add to cart
New IN STOCK Slings and accessories Extra strong slingshot rubber 30/20 (0,65) 100% SLINGSHOT 3020065 Kč161.00 EXTRA STRONG RUBBER 30/20 (0,65) 100% SLINGSHOT is meant for accurate sport and target shooting with 9,5 to 15mm steel balls. This product is made of frost proof latex 100% SLINGSHOT and thanks to that the rubber keeps its elasticity and power even in the harshest conditions. Add to cart
IN STOCK Muzzle brake and compensator Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1) sar218cevo Kč2,950.00 The SAR2 muzzle brake for the CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the weapon from bouncing sideways. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation,... Add to cart
New IN STOCK Slings and accessories Hunting / Sporting slingshot TTF Marco Polo (Lefthanded) mpl Kč1,390.00 Sporting slingshot TTF MARCO POLO (Lefthanded) is slingshot designed for maximally accurate shooting in the highest sports disciplines. This slingshot was constructed after experience with the World Championship in Italy in 2018. Originally there were two handmade pieces of this sling, that were used at the AGS International Slingshot Tournament (Dezhou... Add to cart
IN STOCK Tuning CZ 457 trigger resistance springs spring457 Kč325.00 A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact... Add to cart
IN STOCK Tuning Forehead breech for CZ P-10 czp104 Kč995.00 Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol. Add to cart
IN STOCK Tuning Trigger resistance springs CZ P-10 spring10 Kč325.00 The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are... Add to cart
IN STOCK Tuning Pistol grip ATI for AR-15 / AR-10 ar1510X1 Kč599.00 The high-quality ATI X1 pistol grip is designed for the AR-15 and AR-10 weapon, including their clones and modifications. This grip pistol grip is made of a special DuPont polymer and is resistant to water, extreme temperatures, chemicals and normal mechanical damage.Ergonomics is designed to fit each hand and the grip is as comfortable as possible. The... Add to cart
IN STOCK Tuning Pistol grip ATI X2 for AR-15 ar15X2 Kč599.00 The high-quality ATI X2 pistol grip is designed for the AR-15 weapon, including their clones and modifications. This grip pistol grip is made of a special DuPont polymer and is resistant to water, extreme temperatures, chemicals and normal mechanical damage.Ergonomics is designed to fit each hand and the grip is as comfortable as possible. The selected... Add to cart
IN STOCK Tuning Trigger resistance spring CZ 557, 550 and 527 spring557 Kč245.00 Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... Add to cart
IN STOCK Tuning Trigger resistance spring TIKKA T3, T3x and T1x springt3 Kč245.00 Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... Add to cart
IN STOCK Tuning SAKO 75, 85, 595 and 695 trigger resistance spring springsako Kč245.00 Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... Add to cart
IN STOCK Tuning Walther steel cartridge plug zatwalther Kč990.00 Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure... Add to cart
IN STOCK Tuning Filling PIN for WALTHER air rifles (universal) pinwalther Kč590.00 Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs). Add to cart
IN STOCK Tuning Enlargement of the Walther LG 300 pressure regulator chamber ring4 Kč895.00 Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air... Add to cart
IN STOCK Tuning Reduction for Walther LG 400 reduction1 Kč495.00 By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most... Add to cart
IN STOCK Tuning Silencer for Walther LG 300/400 reduction2 Kč995.00 You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly... Add to cart
IN STOCK Tuning Walther regulator pressure transducer barometr Kč5,490.00 Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400... Add to cart
IN STOCK Tuning Enlargement of the Walther LG 300 pressure regulator chamber with ASSEMBLY ring4m Kč1,290.00 Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air... Add to cart
IN STOCK Tuning Silencer for Walther LG 300/400 with ASSEMBLY reduction2m Kč1,390.00 You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.If you do not dare to install this product, we will be happy... Add to cart
IN STOCK Tuning Walther regulator pressure setting barometr Kč490.00 Do you want to set the pressure regulator to your desired value and do not want to buy a special measuring device? Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly? We will be happy to provide you with this service. We provide pressure adjustment... Add to cart
IN STOCK Tuning Walther LG 300 tension lever pin kolik1 Kč245.00 The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set... Add to cart
IN STOCK Tuning Shortening the Walther LG 300 tension lever kolik2 Kč1,245.00 The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever.Shortening the tension lever seems to be very easy, however, it is a very hard hardened material, so shortening and... Add to cart
IN STOCK Muzzle brake and compensator Muzzle brake F1 PRO for CZ SCORPION (M18x1) f118bevo Kč2,990.00 The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth... Add to cart
IN STOCK Muzzle brake and compensator Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1) f118cevo 1 Reviews Kč3,450.00 The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth... Add to cart
IN STOCK Muzzle brake and compensator Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF) p12ce Kč1,990.00 The PCC muzzle brake is designed for the CZ SCORPION EVO CARABINE and not only compensates for recoil and shot, but also prevents the weapon from bouncing after the shot.The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from... Add to cart
IN STOCK Tuning Fuse cover for CZ SCORPION EVO 3 zas1 Kč450.00 Fuse cover for CZ SCORPION EVO 3.Are you not using the fuse on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused fuse is very easy and you can handle it in a few seconds. Add to cart
OUT OF STOCK Weapon accessories Carbon rods for our LUXURY weapon wiper wiper1 Kč590.00 Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the... Add to cart
IN STOCK Weapon accessories Mirage band elastic (thermal shield) lenta1 1 Reviews Kč945.00 The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this. Add to cart
IN STOCK Weapon accessories External WEAVER for mirage band uchyt1 2 Reviews Kč495.00 External WEAVER handle of lenta (mirage band - heat screen) for situations, when a rifle isn´t equipped with the handle in standard. Our handle is ready for installation on the weaver rail and it is suitable for any regular lenta (mirage band). Handle of lenta is easilly installed on weaver rail (approx. 10 sec.), light and made of quality aerial... Add to cart
IN STOCK Tuning Browning X-BOLT trigger resistance spring springbrow Kč245.00 Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting... Add to cart
IN STOCK Tuning Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for CZ 75 SP-01 Shadow, CZ... montkol75 Kč1,803.00 The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The mounting of the collimator sight is made of refined steel and will serve you 100% for decades. Add to cart
IN STOCK Tuning Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for GLOCK montkolglock Kč1,803.00 The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The assembly of the collimator sight is made of refined steel and will serve you 100% for decades. Add to cart
OUT OF STOCK Tuning Front sight CZ FO 1mm mufo1 Kč760.00 The CZ FO front sight with light-conducting fiber 1mm wide 3.3mm with a height of 5.75mm is suitable for a fixed sight for CZ P-07, CZ P-09, CZ P-10 C. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-07, CZ P-09, CZ P-10 C pistols, where it... Add to cart
OUT OF STOCK Tuning Front sight CZ P-10C FO 1.5mm mufoczp10c15 Kč760.00 The CZ P-10 C front sight with light guide fiber 1.5 mm wide 3.2 mm and 9 mm high is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal... Add to cart
IN STOCK Tuning Front sight CZ P-10C FO 1mm mufoczp10c10 Kč760.00 Front sight CZ P-10 C with optical fiber 1 mm wide 3.2 mm with a height of 9 mm is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal... Add to cart
IN STOCK Tuning Fixed GLOCK sights miglock Kč2,340.00 High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. Sights are supplied in a set, i.e. a fixed sight and a light guide front sight. You can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight is roughened against unwanted glare.Made in Czech... Add to cart